{"id":280,"date":"2022-11-22T20:51:11","date_gmt":"2022-11-23T03:51:11","guid":{"rendered":"http:\/\/www.wolfpack.xyz\/blog\/?p=280"},"modified":"2022-11-22T20:51:13","modified_gmt":"2022-11-23T03:51:13","slug":"layout-begins","status":"publish","type":"post","link":"http:\/\/www.wolfpack.xyz\/blog\/?p=280","title":{"rendered":"Layout begins!"},"content":{"rendered":"\n

Like I mentioned in my last post, I acquired a 3d model and thus dimensions for my cockpit. That combined with some free time I began laying out some pieces on plywood. My plans called for 10mm MDF but that is near impossible to find in my area so I chose 11mm poplar plywood… not the cheapest option at $31.44 CAD<\/strong> but for the structure of the MIP it should work really nicely. <\/p>\n\n\n\n

\n
\"\"<\/a><\/figure>\n<\/figure>\n\n\n\n

I bought three 24×48 inch sheets and have all of them nearly filled and ready to cut.<\/p>\n\n\n\n

\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n<\/figure>\n\n\n\n

I haven’t had time to pull out the saw and cut them yet but I am super excited to do so soon!<\/p>\n\n\n\n

To draw them as precisely as possible I did pick up some additional tools.. First up was a Metric 300mm T-Rule<\/a> and Protractor<\/a> both from Incra Tools<\/strong>. Neither of which are cheap but allow me to mark to a fraction of a MM or degree. To compliment these precision rulers I bought a nice 0.5mm mechanical pencil. (0.5mm is required to fit in the marking holes on the rulers)<\/p>\n\n\n\n

I chose the Kuru Toga Roulette Model 0.5mm<\/a>. I’ve been wanting a nice quality pencil for a while now and this seems to fit the bill. This pencil is unique in the fact that the lead rotates as you use it to keep it evenly tapered, sharp, and precise.<\/p>\n\n\n\n

I hope this post didn’t seem too much like an advertisement! I have 10 pieces ready to cut and am excited to hopefully update you all on that soon. \ud83d\ude42<\/p>\n

Share this:<\/h3>